19mm Keyway Surface Prep Brushes

Clean & strip, wire brushes and the rubber compound surface finishing brushes are all available to fit the burnishing machines and drum sanders which use a 19mm keyway fitting.

  • The FMCS abrasive stripping wheel will also easily remove lacquers, paints and other surface coatings as well being able to apply a surface finish to your workpiece and preparation for paint applications.
  • Abrasive wire wheels with a 19mm keyway are most often used to distress timber or cloeaning surfaces.  They will pull out the soft timber grain and leave the hard grain behind.
  • Rubber wheels with an abrasive matrix held within the rubber are a traditional method of surface conditioning stainless steel lengths.  Available in 3 grit sizes:  16, 46 and 150 grit

At 100mm wide and easily fitting on to your Finimaster or similar machine, the FMCS will provide a high quality result every time.

 Can't find what you are looking for? Take a look at our full range of 19mm keyway wheels and brushes here.

19mm Keyway Surface Prep Brushes