50mm wide rolls – Non Ferrous Metal Detail Sanding Archives

50mm wide rolls – Non Ferrous Metal Detail Sanding

Working by hand you can control the aggression quite a lot by varying the pressure applied so we have offered a range of options here dependent on your specific need.

TF41 material is a flexible aluminium oxide cloth material Although it is often still refered to as ’emery sheets’ actual emery is now far less commonly used due to the higher lifetime characteristics of the TF41 material

P80 grit will remove burrs 2 / 3mm in size

P180 grit will remove light burrs only

£ 65 – £ 70

Showing all 4 results

TF41 Al ox 120 grit roll 50m x 50mm

TF41 Al ox 120 grit roll 50m x 50mm
Add to basket
TF41 Al ox 120 grit roll 50m x 50mm

Ex VAT £65.67 Inc VAT £78.80
In Stock
TF41 Al oxide 80 grit roll 50m x 50mm

TF41 Al oxide 80 grit roll 50m x 50mm
Add to basket
TF41 Al oxide 80 grit roll 50m x 50mm

Ex VAT £69.07 Inc VAT £82.88
In Stock
TF41 Al ox 180 grit roll 50m x 50mm

TF41 Al ox 180 grit roll 50m x 50mm
Add to basket
TF41 Al ox 180 grit roll 50m x 50mm

Ex VAT £65.67 Inc VAT £78.80
In Stock
TF41 Al ox 150 grit roll 50m x 50mm

TF41 Al ox 150 grit roll 50m x 50mm
Add to basket
TF41 Al ox 150 grit roll 50m x 50mm

Ex VAT £65.67 Inc VAT £78.80
In Stock

50mm wide rolls – Non Ferrous Metal Detail Sanding

TF41 Al ox 120 grit roll 50m x 50mm

TF41 Al ox 120 grit roll 50m x 50mm

TF41 Al oxide 80 grit roll 50m x 50mm

TF41 Al oxide 80 grit roll 50m x 50mm

TF41 Al ox 180 grit roll 50m x 50mm

TF41 Al ox 180 grit roll 50m x 50mm

TF41 Al ox 150 grit roll 50m x 50mm

TF41 Al ox 150 grit roll 50m x 50mm

ABRASIVE FINISHING SYSTEMS