Our range of polishing & cleaning products for metal include:
Traditionally use synthetic tallow with abrasive discs and belts to lubricate and prevent loading or clogging of the abrasive. Many of our customers are now replacing Tallow Bar with Alugrind
Extend your disc life when grinding aluminium and other non-ferrous metals, just spray the abrasive disc!
Cleaning powder for use during and after polishing. Removes remnant polishing compound from the metal workpiece effortlessly and without leaving scratches. Use in combination with a clean microfibre cloth.
Removes fingerprints, dirt and oil residues from brushed stainless steel, metal, laminated plastic, ceramic tiles, etc. fast and effortlessly. Gives a smooth and immaculate finish to the surface. Apply a thin protective coating to effectively prevent finger grease contamination.
Ideal for cleaning polished stainless steel and other high gloss surfaces. Removes dirt, oil and fingerprints without scratching the surface, fast and without leaving stripes.
In metal polishing, once you have achieved a good finish with polishing soap, it will be necessary to remove any excess polish, ideally whilst the metal is still warm. The best way to do this is with Vienna Chalk.
When applied to the metal surface with a soft, lint free cloth, the Vienna Chalk absorbs and removes any excess polish to leave a clean and bright finish.
No. Inoxiclean spray cleans and degreases the metal surface, but then it leaves a protective film on the surface which will cause the mirror polish to look dull.
We have created a specific product Called Inoxiclean Foam which is ideal for this role. InoxiClean Foam cleans, degreases and removes tarnish from mirror polished surfaces.
Think of it as grinding aids in a can. A light spray on your sanding disc before you start grinding or sanding aluminium will reduce the heat at the grinding interface, preventing the aluminium from loading or clogging up the disc. Thus, Alu Grind has the effect of increasing the speed of cut and the disc life at the same time.
Use it to replace tallow. For more details why not check out the Alu Grind Blog page here.
