Close

Showing 1–12 of 138 results

Filter»

Abrasive sanding belts for a wide range of hand held tube polisher machines are on this page.

Tube Polisher Machine Sizes

There are several sizes of abrasive belt used on different manufacturer’s tube polisher machines.

  • The Cibo Finitube uses 675mm x 40mm belts.
  • The Metabo RBE 15 along with a number of imported machines from Asia use the same grinding head which works with 760 x 40mm abrasive belts.
  • There are also a range of lower power imported tube polishers which also use 760 x 40mm sanding belts including:  Metalkraft, Luzeo,  MSW, Rosenor, HBM, Holzman RSG, Mophorn, Vevor and many more private labelled tube polishers.
  • Hilti 6X-A22 also uses 760 x 40mm sanding belts along with the Stayer LT1401 EK
  • Fein and Poly-Romy use 820mm x 40mm belts.
  • Suhner and Metabo have a mini belt tube polisher which uses belts 533 x 30mm
  • The Flex LBR1503 uses belts 610 x 40mm

We stock a wide range of tube polishing belts, but if you cannot see the belts you need, then please contact us. We can manufacture any belt you require. The standard production lead time is 7 – 10 working days.

Helpful Guides

tube polisher sanding belts
Tube Polisher Sanding Belt Materials
Read More...
Finitube surface conditioning belt
How to Satin Finish Stainless Steel Tubes to 240 Grit
Read More...

Tube Polishing Machine Belts

Blend any previous sanding marks with the FF87 120 grit belts and then finish with the medium surface conditioning belts to leave a soft satin 240 grit finish.

Q-Rail tubes have a slightly finer finish than the traditional P240 grit finish. Pre-finish with a P180 FF87 belt, and then use the very fine surface conditioning belt to blend the finish with the original Q-Rail tube.

For the Cibo Finitube the part numbers are:

  1. P80 grit belt (if needed)         FF87/80/675X40
  2. P180 grit belt to refine finish  FF87/180/675X40
  3. Very fine conditioning belt      VT/RC3/675X40

It is possible to do small repair work, but we do not recommend hand held tube polishers for large area mirror polishing. Use the non-abrasive surface conditioning belts with our PV/101 polishing soap once you have prepared the surface.