Removing fillet welds is not a problem as long as you have easy access to the weld. But that is the problem!! If your weld angle is 90 degrees , or more acute, how do you get in. That is why Cibo developed the FinitEasy fillet weld grinder. A long reach arm built on a variable speed motor unit gives clear access with good visibility. The only question then is, ‘Which products do I need?’
The ideal product depends on the width of the weld. With a mig weld you are normally looking at a weld radius of approx 6mm so we are recommending 6mm wide wheels
SA 8: Fast material removal of the metal to leave an approx 180 grit finish
SA6: Slower but still a good rate of stock removal. we recommend this disc if the metal is to be polished afterwards.