Beltit 457mm long belts – Non Ferrous Metal Mirror Polish Internal Corners

Stage 1: Remove the weld with the 220 grit belts for the Beltit (it may be a little slower initally but that will ensure a much faster and cleaner final finish is achieved)

Stage 2: Repeat stage 1 with the JF4top 400 grit.

Stage 3: Apply green polish (PV/101) to the non-abrasive conditioning belt and then remove any excess polish with the vienna chalk.

Stage 4: Reprewat stage 3 with a clean non-abrasive belt and the pink (PV/102) polish after which clean the surface again with a lint free cloth and the vienna chalk.

PV101 Green Polishing compound

PV101 Green Polishing compound

PV103 Vienna Chalk – 300g

PV103 Vienna Chalk – 300g

Surface Conditioning polishing belt 457mm x 13mm

Surface Conditioning polishing belt 457mm x 13mm

JF4T Al oxide 220 grit belt 457mm x 6mm

JF4T Al oxide 220 grit belt 457mm x 6mm

ABRASIVE FINISHING SYSTEMS