Beltit 533mm long belts – Non Ferrous Metal Mirror Polish Internal Corners

Stage 1: Remove the weld with the Medium (red) scm belts for the Beltit (it may be a little slower initially but that will ensure a much faster and cleaner final finish is achieved)

Stage 2: Repeat stage 1 with the Very Fine (blue) belt.

Stage 3: Apply green polish (PV/101) to the non-abrasive conditioning belt and then remove any excess polish with the vienna chalk.

Stage 4: Repeat stage 3 with a clean non-abrasive belt and the pink (PV/102) polish after which clean the surface again with a lint free cloth and the vienna chalk.

PV101 Green Polishing compound

PV101 Green Polishing compound

SCM surface conditioning belt Very Fine A 533mm x 6mm

SCM surface conditioning belt Very Fine A 533mm x 6mm

SCM surface conditioning belt Medium A 533mm x 6mm

SCM surface conditioning belt Medium A 533mm x 6mm

PV103 Vienna Chalk – 300g

PV103 Vienna Chalk – 300g

SCM Non abrasive polishing belt 533 x 13

SCM Non abrasive polishing belt 533 x 13

ABRASIVE FINISHING SYSTEMS