Stage 1: Remove the weld with the 220 grit belts for the Dynafile (it may be a little slower initally but that will ensure a much faster and cleaner final finish is achieved)
Stage 2: Repeat stage 1 with the JF4top 400 grit.
Stage 3: Apply green polish (PV/101) to the non-abrasive conditioning belt and then remove any excess polish with the vienna chalk.
Stage 4: Reprewat stage 3 with a clean non-abrasive belt and the pink (PV/102) polish after which clean the surface again with a lint free cloth and the vienna chalk.