Showing all 4 results
If you need to grind and shape a stainless steel mig weld with a 533mm Beltit then you will need to remove a lot of metal. For this reason we have selected our most aggressive FX87 Cibo Ceramic abrasive belts.
A mig weld will also give a much wider weld profile than Tig so all the belts below are either 13mm or 6mm wide.
This is one of the few Dynafile belt powerfile applications where we would recommend a 40 grit abrasive as the first choice. But this does depend on what you need to do afterwards.
n.b. Both a 40 and 60 grit belts will leave burrs. If you need an entrapment free finish then we would recommend following up with the FX87 80 grit and a coarse or medium conditioning belt.