533 x 6mm Beltit Powerfiles – Stainless steel Mirror Polish - Internal Corners

If you cannot use the FinitEasy to mirror polish stainless steel tube fillet welds then the next best option is using an abrasive powerfile such as the Beltit.

The powerfile process takes more time but it can be done well with care. Below we have detailed the steps required and in the correct sequence. If you can control the speed then you will find it much easier to work more slowly in the earlier steps and then gradually increase the speed of the machine as the finsh gets finer.

We have assumed you will need to remove a tig weld. In which case the coarsest belt you will need is the FX87 P80 grit but if you can omit this stage and begin with the A160 or even the A65 Trzact belts then it is a good idea to do so.

FX87 Ceramic 80 grit belt 533mm x 6mm

FX87 Ceramic 80 grit belt 533mm x 6mm

Surface Conditioning polishing belt 533mm x 6mm

Surface Conditioning polishing belt 533mm x 6mm

237AA Trizact A65 belt 533mm x 6mm

237AA Trizact A65 belt 533mm x 6mm

237AA Trizact A6 belt 533mm x 6mm

237AA Trizact A6 belt 533mm x 6mm

237AA Trizact A30 belt 533mm x 6mm

237AA Trizact A30 belt 533mm x 6mm

237AA Trizact A160 Beltit powerfile belt 533mm x 6mm

237AA Trizact A160 Beltit powerfile belt 533mm x 6mm

ABRASIVE FINISHING SYSTEMS