For the complete solution follow the steps indicated below. The products are ordered in order of final finishing sequence. Begin your process at the required level for you and a beautiful 240 grit satin finish will be easily achieved. Step 1: Use the P80 FX87 ceramic abrasive belts to remove any residual sanding lines. Step 2+3: Create the grain structure with the 337DC belts. - 337DC creates a lovely short scratch finish which replicates the orginal mill finish grain structure - It is worth taking time to get this stage of the process right, particularly if working on larger areas Step 4: Blend the overall finish with the FMTA 600 brushes. If you are also creating a mitre corner finish then use the Inoxitape to mask the corner to create a perfect sharp finish.
