Finimaster pro P320 finish - Stainless steel satin finish flat sheet

For the complete solution follow the steps indicated below. The products are ordered in order of final finishing sequence. Begin your process at the required level for you and a beautiful 320 grit satin finish will be easily achieved.

Step 1: Use the P80 FX87 belts on the inflatable tyre to remove any residual sanding lines.

Step 2 + 3: Create a complex satin grain structure with the 337DC belts.

– 337DC creates a lovely short scratch finish which replicates the orginal mill finish grain structure

– It is worth taking time to get this stage of the process right, particularly if working on larger areas

Step 4: Blend the overall finish with the FMTM 600 Tex / scotchbrite type brushes.

If you are also creating a mitre corner finish then use the Inoxitape to mask the corner to create a perfect sharp finish.

Inoxitape – 5m roll Self Adhesive Stainless Steel Shim

Inoxitape – 5m roll Self Adhesive Stainless Steel Shim

FX87 Ceramic 80 grit belt 385mm x 100mm

FX87 Ceramic 80 grit belt 385mm x 100mm

337DC Trizact A300 belt 385mm x 100mm

337DC Trizact A300 belt 385mm x 100mm

337DC Trizact A65 belt 385mm x 100mm

337DC Trizact A65 belt 385mm x 100mm

FMTM Tex 600 grit flap wheel 120mm x 110mm x M14mm

FMTM Tex 600 grit flap wheel 120mm x 110mm x M14mm

ABRASIVE FINISHING SYSTEMS