How to satin finish stainless steel handrail with the Suhner tube polisher

We detail below how to satin finish stainless steel handrail with the Suhner tube polisher. The Suhner hand held tube polisher is a much smaller machine than the Cibo Finitube and is suitable for detail sanding / repair work on stainless tubes and handrails.

Below are the most popular belts required for putting a 240 grit finish onto stainless steel tubes and handrails. For a full range of belts for the Suhner machines use the following link: Suhner belts

We recommend using the FX87 belt to put a clear grain into the surface and the VT/RC2 medium grade belts to put the final soft satin finish on the surface of the tube.

FX87 Ceramic 120 grit belt 533mm x 30mm

FX87 Ceramic 120 grit belt 533mm x 30mm

FX87 Ceramic 80 grit belt 533mm x 30mm

FX87 Ceramic 80 grit belt 533mm x 30mm

SCM Surface Conditioning Belt Medium A grade 533mm x 30mm

SCM Surface Conditioning Belt Medium A grade 533mm x 30mm

TZ59 Zirc 120 grit belt 533mm x 30mm

TZ59 Zirc 120 grit belt 533mm x 30mm

ABRASIVE FINISHING SYSTEMS