DP1 to P80 - 1900x1100 - Stainless steel satin polish sheet or strip

It is impossible to create every belt size and every part number but we can make them. Please contact us to receive a quote on the belts to fit your machine.

The most common grit size used to create a 240 grit satin finish on sheet is 80 grit (yes we know it is not 240 grit!!)

Material Options:

KP949 – Strong F weight paper backed aluminium oxide cloth belts. Use when you have a clean, descaled stainless steel sheet and it is a low aggression application.

KP950 – Strong F weight paper backed zirconia cloth belts. Use where a higher cut and abrasive life is needed than with KP949

FX87 – Heavy duty polyester backed ceramic abrasive cloth belts. Where high aggression is needed. Will cut through mill scale very effectively.

FX87 Ceramic 80 grit abrasive belt 1900mm x 1100mm

FX87 Ceramic 80 grit abrasive belt 1900mm x 1100mm

KP950F Zirconia 80 grit wide belt 1900mm x 1100mm

KP950F Zirconia 80 grit wide belt 1900mm x 1100mm

KP950F Zirc 40 grit belt 1900mm x 1100mm

KP950F Zirc 40 grit belt 1900mm x 1100mm

ABRASIVE FINISHING SYSTEMS