Scale Removal to P80 - 1900x630 - Stainless steel satin polish sheet or strip Archives

Scale Removal to P80 - 1900x630 - Stainless steel satin polish sheet or strip

It is impossible to create every belt size and every part number but we can make them. Please contact us to receive a quote on the belts to fit your machine.

The most common grit size used to create a 240 grit satin finish on sheet is 80 grit (yes we know it is not 240 grit!!)

Material Options:

KP949 – Strong F weight paper backed aluminium oxide cloth belts. Use when you have a clean, descaled stainless steel sheet and it is a low aggression application.

KP950 – Strong F weight paper backed zirconia cloth belts. Use where a higher cut and abrasive life is needed than with KP949

FX87 – Heavy duty polyester backed ceramic abrasive cloth belts. Where high aggression is needed. Will cut through mill scale very effectively.

£ 88 – £ 152

Showing all 3 results

FX87 Ceramic 80 grit belt 1900mm x 630mm

FX87 Ceramic 80 grit belt 1900mm x 630mm
Add to basket
FX87 Ceramic 80 grit belt 1900mm x 630mm

Ex VAT £88.69 Inc VAT £106.43
Available on back-order
FX87 Ceramic 60 grit belt 1900mm x 630mm

FX87 Ceramic 60 grit belt 1900mm x 630mm
Add to basket
FX87 Ceramic 60 grit belt 1900mm x 630mm

Ex VAT £96.82 Inc VAT £116.18
Available on back-order
FX87 Ceramic 36 grit belt 1900mm x 630mm

FX87 Ceramic 36 grit belt 1900mm x 630mm
Add to basket
FX87 Ceramic 36 grit belt 1900mm x 630mm

Ex VAT £151.62 Inc VAT £181.94
Available on back-order

Scale Removal to P80 - 1900x630 - Stainless steel satin polish sheet or strip

FX87 Ceramic 80 grit belt 1900mm x 630mm

FX87 Ceramic 80 grit belt 1900mm x 630mm

FX87 Ceramic 60 grit belt 1900mm x 630mm

FX87 Ceramic 60 grit belt 1900mm x 630mm

FX87 Ceramic 36 grit belt 1900mm x 630mm

FX87 Ceramic 36 grit belt 1900mm x 630mm

ABRASIVE FINISHING SYSTEMS