Product: MHIT Description: Supplied in a useful dispensing box, the self adhesive Inoxitape protects parts of your workpiece whilst sanding / brush finishing the stainless steel.
Application: Step 1: Cut the Inoxitape to required length with scissors Step 2: Remove the self adhesive backing and apply to the metal surface (ensure the workpiece is cooled prior to applying). align the edge of the tape precisely where you would like the mitre joint line to appear Step 3: Using a tex or combi brush sand the metal brushing onto the Inoxitape, taking care not to cross to the other side of the Inoxitape. Re-affix the tape in the correct position to complete the mitre finish and then re-brush. Step 4: Remove the Inoxitape to leave a perfect mitre finish on your stainless steel.
To finish we recommend you give a final surface clean with the SPIC Inoxiclean protection spray and wipe with a soft cloth to remove any remnant sanding residue and glue.
Inoxitape roll with easy use dispenser
5m x 40mm
Inoxitape - 5m roll adhesive backed stainless steel shim