Satin finish stainless steel fillet welds with the Cibo FinitEasy

How to satin finish stainless steel fillet welds with the Cibo FinitEasy and unitised abrasive discs. The MA8 disc will remove, blend and radius the fillet welds. The MA5 disc will remove weld discolouration. The MA5 will also blend the satin finish pattern to leave a bright, soft satin finish using the Cibo FinitEasy fillet weld grinder.

Below we will detail the process for removing and satin finishing the fillet weld. If you don’t want to remove the weld then just go straight to step 2.

Step 1: Use the MA/8 disc on the FiniEasy weld grinder to remove and radius the fillet weld

Step 2: Use the MA/5 to remove weld colour, blend the satin finish stainless steel fillet welds with the Cibo FinitEasy. This will leave a bright, soft satin finish.

Step 3: Finally, a quick rub with the Fine A Tex, ‘scotchbrite’ strips to ensure a seamless final satin finish across the full length of the tube

You can buy this process complete in the Cibo Time Saving Kit set 2 which is also available below.

Unitised MA8 disc 150mm x 3mm x 25.4mm

Unitised MA8 disc 150mm x 3mm x 25.4mm

FMGRT tex Fine A grip strip 600mm x 40mm

FMGRT tex Fine A grip strip 600mm x 40mm

Unitised MA5 wheel 150mm x 6mm x 25.4mm

Unitised MA5 wheel 150mm x 6mm x 25.4mm

TSK02 Kit: satin polishing stainless fillet welds

TSK02 Kit: satin polishing stainless fillet welds

ABRASIVE FINISHING SYSTEMS