Showing all 3 results
The Garboli LPC300 use belts size 940 x 60mm, they are the best and most popular orbital tube polisher for satin finishing stainless steel tubes and handrails.
Use the FX87 P80 grit ceramic abrasive belts to create a consistent grain finish and remove any damage or welds. 80 grit ceramic belts will remove tig welds easily leaving a consistent grain finish to be blended by the Medium surface conditioning belts. The SCM belts will leave a high quality 240 grit satin finish on the stainless steel tube.
If you are working with particularly tight bends then we recommend using the super flexible FF87 ceramic 80 grit belts. The wave edge will ensure no chatter marks on the tubes.
Showing all 3 results