Finimaster + Keyway Wheels 230v Set 2 steel case

Ex VAT £885.16    Inc VAT £1,062.19

Available on back-order

In Stock

Qty
BRAND:
SKU: FMBA/230/SET2 Supplied in a strong case with a range of products (detailed below)

Manufacturing Lead time 5 days

Share:
EmailFacebookTwitterPinterest

110 volt Cibo Finimaster Keyway drum sander: The ideal satin polishing machine for sheet, round tube, square tube and box section finishing.

For graining, satin finishing and polishing.

The Finimaster Set 2 contains a wide range of abrasive belts / sleeves and wheels which mount onto the 19mm keyway shaft.

– The FMNU inflatable wheel (supplied in set 2) can be used with a wide range of abrasive sleeves (from 36 grit to mirror polishing)

– FMTA & FMCA wheels are ideal for satin polishing

– The FMSB drive wheel means you can even polish and grain tubes with the Finimaster keyway

Contents:

FMBA Finimaster Basic Machine (x1)
FMTA Tex Wheel (x1)
FMCA Combi Wheel (x1)
FMSB Drive Wheel For Belts (x1)
FMNU Inflatable Wheel (x1)
Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4)
Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3)
Trizact A300 Abrasive Belts (x2)
FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2)
Open Belts (x2)
Inoxiclean Stainless Steel Cleaner (x1)
FORU Rubber Sanding Block (x1)
MHIT Stainless Steel Inoxitape (x1m)

Finimaster Keyway wheels connect directly onto the 19mm keyway.

Looking for consumables for this machine? Use these links to shop for the suitable belts and wheels…

Abrasive Sleeves = 293mm x 100

Surface Conditioning Sleeved = 305mm x 100

Abrasive sleeves: https://abrasive-systems.co.uk/abrasive-belts/belts-for-hand-held-machines/satin-polishing-machine-belts

Abrasive wheels: https://abrasive-systems.co.uk/abrasive-wheels-brushes/keyway-brushes-for-drum-sanders-burnishers

Machine

Finimaster Keyway

Machine Fixing

Keyway

Kit Machine

Machine and Parts

Power supply

230 volt

We can supply 2 different wheels to fit abrasive sleeves onto the Finimaster Keyway drum sander:
FMNU//374:   100mm inflatable tyre   -  The FMNU//374 is the standard inflatable wheel sold with the Finimaster Keyway sets
   -   Abrasive belt / sleeve dimensions 293 x 100mm    -   Surface Conditioning belt / sleeve dimensions 305 x 100mm  
FMRU:  100mm ventilated rubber wheel   -  Abrasive belt / sleeve dimensions 287 x 100mm    -   Surface Conditioning belt / sleeve dimensions 293 x 100mm  
Vibration Data:
We can only give base test data for any of our machines as the data will vary dependent upon the grade and density of the wheels or belts used on the machine and also upon the speed at which the machine is operated.
Finimaster Keyway - 3.54 m/s2