Looking for Cibo fillet weld grinding discs? All the products you need are here. Check out 2 new exciting unitised fillet weld discs:
Cibo’s New GA Combi Unitised Discs: Combine the SA5 unitised pre-polish finish with the aggression of the MA discs. More details below or read our GA Combi blog here.
TA10 – For Heavier Tig Welds. Need to remove larger tig welds? The TA10 is the fastest cutting unitised disc.
150mm diameter unitised discs, to fit fillet weld grinders, including the Cibo Finiteasy & the FinitAll narrow head grinder.
Fillet weld grinding discs are 3 or 6mm wide discs of unitised abrasives in a range of grits and grades. The most aggressive is the TA10 disc which is aggressive enough to remove steel mig welds. The least aggressive is the SA5 unitised disc which will remove weld colour and pre-polish stainless steel.
Cibo developed the TA10 unitised disc for heavier tig welds which are commonly needed in pharmaceutical vessel manufacturing. The TA10 uses a more complex engineered abrasive grain whilst still benefiting from the unitised construction.
Cibo Abrasives have an excellent record of end user driven innovation. Based on the problems we see in the market, we are constantly on the look-out for ways to improve process times AND reduce process complexity. It was out of this philosophy that the combi unitised range was born.
The most popular process for polishing fillet welds was developed by Cibo 15 years ago, with the introduction of the Cibo FinitEasy. Previous to this, dynafiles & Beltit powerfile machines had been used which were slow, cumbersome and prone to causing abrasive belt damage when grinding out the weld. However, they still have their place in the workshop for heavier weld grinding.
In simple terms, Combi Unitised is an aggressive MA unitised disc sandwiched between two softer & finer SA unitised discs.
All GA Combi discs are 6mm wide to allow the aggressive centre of the disc to remove and blend the weld in the middle of the fillet, whilst leaving the flexible and finer outer edges to apply a consistent, high quality, fine satin finish on your workpiece. This leaves a surface finish which is ready for mirror polishing if required.
The new Cibo Combi unitised discs.
Labour is always the big cost and GA Combi Unitised discs will save you time and money.
In the Cibo tradition of innovation, the Combi Unitised discs allow you to remove a weld and apply a high quality finish which is suitable for mirror polishing in one action.
There are two key benefits to the GA Combi unitised process. Firstly, it is easier and simpler, and secondly, what was once a six stage process is now one or two stages.
Stage 1: Remove and polish the tig weld with GA Combi Unitised. Only satin polishing? Stop right here.
Stage 2: Mirror polish the weld with a felt disc and Cibo polish.
