November 27, 2025
Introducing the Cibo Finimaster Pro. After listening to our customers we can bring the next generation hand held drum sander.
All the advantages of traditional keyway burnishing machines, and adds next generation experience including, larger diameter wheels, increased head flexibility for curved surfaces, better visibility and a quick change wheel system.
When working with abrasive sleeves on a solid or inflatable tyre have you struggled to remove chatter marks on the metal surface? A common problem caused by the small wheel footprint on the metal surface.
Ever got annoyed because the locking nut on the burnisher doesn’t let you get to the edge of your workpiece?
Or how about when working on curved surfaces? Not being able to move the handle makes control difficult.
Visibility of the workpiece has been a perennial problem. How can you blend the finish if you can’t see what you are doing?
All good reasons for creating the next generation Finimaster Pro.
The obvious simple solution is to increase the inflatable wheel size. Larger abrasive sleeves means that the footprint of the belt in contact with the metal can be increased. Now a slight nip on the tyre pressure is all that is needed to get a smooth consistent, chatter free finish.
n.b. Given the larger diameter of wheel we do not need to supply a solid rubber wheel for the abrasive sleeves on the Finimaster Pro. Try the Cibo ceramic belts for aggression and control.
Removing the 19mm keyway and fixing the abrasive wheels directly onto the M14 thread has a number of advantages.
The ergonomic handle on the Cibo Finimaster Pro is mounted on the head of the motor body and has an easily accessible allen key release nut to allow for free movement of the handle when required.
Release the allen key to allow for continuous movement of the handle. Ideal for curves and tube work. Lock the allen key to ensure a consistent grip position.
Visibility on the Finimaster Pro is improved in 2 ways. Firstly by designing the safety cover in a way which allows a better view of the abrasive wheels.
Secondly the larger wheel diameter allows for a much clearer view around the workpiece.
Select from a wide range of abrasive sleeves specifically designed for the Cibo Finimaster Pro too. The standard size for abrasive sleeves is 385 x 100mm. With almost 40% more material in each sleeve than 280 x 100mm sleeves we can offer cooler cutting, longer lifetime and more control with the Finimaster Pro. Standard Products available include:
FX87 ceramics, FF87 flexible alumino ceramics, Trizact 237AA and 337DC and surface conditioning sleeves.
Buy Finimaster Pro Sleeves here:Â Finimaster Pro Sleeves
One of the key benefits of the Cibo Finimaster Pro kit is it’s flexibility. Included with the Set 2 is a drive wheel for running the velcro belt system. Ideal for sanding tubes.
The abrasive and tex belts are bonded to a velcro fixing system allowing the belts to be run ‘inside out’. Use the flexible hood on the Finimaster to sand a full 360 degrees around the tube.
Watch the Finimaster Grip Belt video below
Choose the Cibo Finipower + variable speed grinder and the 50mm wide finishing wheels.
