FMCAC 60 grit Ceramic Combi Flap wheel 100 x50 19mm keyway

Ex VAT £21.55    Inc VAT £25.86

In Stock

In Stock

SKU: FMCAC/60/10050 Interleaved Finimaster wheel - 60 grit : High performance - 60 grit Ceramic Abrasive and Coarse Tex cloth : 100 mm x 50 mm x 19 mm keyway

Please note: This item is available to purchase in increments of 2


Also called ‘The Ginger Ninja’ our new 60 grit ceramic cloth wheels have a surprisingly high durability and cut rate.

Use the Combi 60 grit ceramic wheels for edge shaping surface damage removal and even light scale removal on stainless steel to create a consistent grain finish.

Dependent on the final finish required a fine satin finish can be achieved if the FMCM/60 is followed by either an FMCM/80 wheel or FMTM.

Use with Finimaster Basic machine or other 19mm keyway driven satin polishing machines and drum sanders. size is 100 mm x 50 mm x 19 mm Keyway fixing.

Note: The 100 x 50mm keyway brushes can also be used with variable speed grinders such as the Cibo Finipower Plus. Ideal for narrower box section and strip satin finishing.

Cibo’s Ceramic Combi Grinding Wheels:

The development of the ceramic combi wheel has created the first grinding wheel that combines an aggressive ceramic linen with a soft tex. This provides a wheel that has two functions. Press hard and you have an aggressive wheel with a high grinding capacity.  Grind with less pressure and you can easily create a fine smooth finish with this wheel.

Combining these two properties allows you to grind starting with a 2B finish through to a polished finish 220 in one go. 

Furthermore, grinding with this wheel generates a much lower temperature due to the ceramic linen.  This also makes it possible to machine very thin plates without risking deformation caused by the generation of excessive heat.


– Brush thin (curved) plates.

– Clean up surfaces to be welded.

– Remove damage or machine markings and refinish in one go.

– Completely remove mill scale (cold rolled) and brush to industrial finish 220 in one go.

– Prepare surfaces for paints and coatings.

Want to use the Cibo Combi Wheel (Ginger Ninja) but this is the wrong fixing? Then choose between their full range of M14, 19mm and spindle mounted wheels:

M14 Thread – FMCMC

19mm Keyway – FMCAC

6mm Spindle – CSC

Grit Size

60 grit

Cibo Product Code




Backing Type


Grit Type